Marquee 8521 Ultra Green (HUD) User's Manual
B-12
Marquee Projectors RS-232 Control
Select Recall (00)
01 07 00 00 03 FF 0C 00 00 0E
Select Recall (15)
01 07 00 00 03 FF 0C 0F 00 0E
Request Current Recall
01 06 00 00 03 FF 8C 00 0E
Reply with Recall
01 07 03 FF 00 00 8C 0F 00 0E
(recall 15)
Reply with Recall
01 07 03 FF 00 00 8C 00 00 0E
(recall 0, i.e. using input memory)
Request Signal Status, Freq
01 07 00 00 03 FF 91 00 00 0E
Reply w/ Sig.Status,Freq
01 0B 03 FF 00 00 91 00 0C 4E 17 70 00 0E
(31.5Khz,60.0Hz)
Request Sig. Status, State
01 07 00 00 03 FF 91 1B 81 00 0E
Reply w/ Sig. Status, State
01 08 03 FF 00 00 91 1B 81 00 00 0E
(Good,SignalLocked)
Reply with Signal Status, State
01 08 03 FF 00 00 91 1B 81 1B 81 00 0E
(Changing src)
Reply with Signal Status, State
01 08 03 FF 00 00 91 1B 81 02 00 0E
(Error,sync err)
Request Signal Status, Sync On?
01 07 00 00 03 FF 91 02 00 0E
Reply with Signal Status, Sync
01 08 03 FF 00 00 91 02 00 00 0E
(No sync)
Reply with Signal Status, Sync
01 08 03 FF 00 00 91 02 1B 81 00 0E
(Sync On Green)
Reply with Signal Status, Sync
01 08 03 FF 00 00 91 02 02 00 0E
(Composite Sync)
Reply with Signal Status, Sync
01 08 03 FF 00 00 91 02 03 00 0E
(Sep.HSync on H.)
Reply with Signal Status, Sync
01 08 03 FF 00 00 91 02 06 00 0E
(SyncfromDecoder)
Request Ping
01 06 00 00 03 FF 81 00 0E
Reply w/ Data
01 0D 03 FF 00 00 81 02 03 04 61 00 48 00
00 0E
See page 18 for additional information
Select Internal Test Pattern
01 08 00 00 03 FF 7F 07 17 00 0E
(crosshatch)
Select Internal Test Pattern (ext.)
01 08 00 00 03 FF 7F 07 00 00 0E
Request Current Test Pattern
01 07 00 00 03 FF FF 07 00 0E
Reply with Current Test Pattern
01 08 03 FF 00 00 FF 07 1B 93 00 0E
(dots in crosshatch)
Reply with Current Test Pattern
01 08 03 FF 00 00 FF 07 00 00 0E
(ext.)
Select Internal Frequency (1)
01 07 00 00 03 FF 35 1B 81 00 0E
Select External Freq (signal)
01 07 00 00 03 FF 35 00 00 0E
Request Current Internal Freq
01 06 00 00 03 FF B5 00 0E
Reply with Internal Freq
01 07 03 FF 00 00 B5 1B 81 00 0E
(Int Freq 1, menu)
Set Proj Address to 0
01 08 00 00 03 FF 02 00 00 00 0E
Set Proj Address to 14
01 08 00 00 03 FF 02 00 1B 8E 00 0E
Request Proj Address (broadcast) 01 06 80 00 03 FF 82 00 0E
Reply with Proj Address
01 08 03 FF 80 00 82 00 1B 8E 00 0E
(proj address 14)
If broadcasting: Same as above examples, except use “80 00” for destination
Example:
Set Tint to 0
01 07 80 00 03 FF 58 00 00 0E
Set Tint to 32
01 07 80 00 03 FF 58 20 00 0E
Request Tint Value (max. 1 proj.)* 01 06 80 00 03 FF D8 00 0E
Reply w/ Tint Value (max. 1 proj.)* 01 07 03 FF 80 00 D8 20 00 0E
(32, 50%)
* Do not broadcast a request to more than one projector, as it may generate multiple
attempts at replies that could collide on the network.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
