VCS VideoJet 8000, User Manual

Page: 100 / 148

Configuration using a Web Browser Chapter 5
100 VideoJet 8000
– Click Select area to configure the sensor fields. A new window will open.
– If necessary, click Clear all first to clear the current selection (fields marked
red).
– Click the fields to be activated. Activated fields are marked red.
– Click Select all to select the entire video frame for monitoring.
– Right-click any fields you wish to deactivate. "Inactive" fields are marked white.
– Click Set to save the configuration.
– Click the close button ( X ) in the window title bar to close the window without
saving the changes.
Local sensitivity
The basic sensitivity of the video sensor can be adjusted to the environmental
conditions of the camera.
The sensor reacts to variations in the brightness of the video image. The darker
the observed area, the higher the value that must be selected.
– Adjust the sensitivity by dragging the scroll thumb to the desired setting.
Average [n frames]
You can define the number of frames for which a movement is monitored before
generating an alarm. This helps prevent false alarms from events such as a bird
flying across the surveillance area.
– Select the desired value by dragging the scroll thumb to the desired position.
Alarm area size:
You can specify the number of sensor fields that a moving object must cover to
generate an alarm. This is to prevent objects that are too small from triggering an
alarm.
The minimum setting is "1". This corresponds to one sensor field.
– Select the desired value by dragging the scroll thumb to the desired position.
Motion alarm status:
This field lists all the motion alarms and the date and time of their occurrence. The
events for the currently selected camera input will be listed.