VCS VideoJet 1000, Manual

Page: 9 / 106

11
VideoJet 1000
Safety information
2
Electrical shock hazard
z
Never attempt to connect the unit to any power network other
than the one for which it was intended.
z
Do not open the housing of the unit.
z
Disconnect the unit from the mains power supply and from all
other devices if a fault occurs.
z
Install the unit only in a dry place protected against the elements.
z
If you are uncertain about the safe operation of the unit, shut it
down immediately and secure it to prevent any unauthorised
start-up. Safe operation is no longer possible, for example,
– if damage is visible to the unit or the cables,
– if the unit no longer operates correctly,
– if the server has been exposed to rain or moisture,
– if objects have penetrated inside the unit,
– after long storage under improper conditions or
– after heavy demands during transport.
Have the system checked by VCS in such cases.