VCS VideoJet 1000, Manual

Page: 22 / 106

Installation
24
VideoJet 1000
)
Remove connector block from Input socket.
)
Insert conductor into connector and secure tightly – check that
screws are securely tightened.
)
Replace the connector firmly back onto the Input socket.
Switched output The VideoJet 1000 is provided with a relay output for switching
external equipment, e.g. lamps or acoustic alarms. This switched
output can be manually activated during an active connection with
the VideoJet 1000. In addition, when suitably configured the output
can be activated as a response to an alarm signal, for example, to
automatic acoustic alarms or to other devices.
)
Remove connector block from Output socket.
)
Insert conductor into connector and secure tightly – check that
screws are securely tightened.
)
Replace the connector firmly back onto the Output socket.
Microphone/
loudspeaker The VideoJet 1000 is provided with an audio interface via the two
stereo jack sockets.
The bidirectional audio signals are simultaneously transmitted
along with the video signals. This can be used to drive a loud-
speaker or door communication system as required.
)
Connect the microphone to the jack socket Audio In .
)
Connect the loudspeaker to the jack socket Audio Out .
Warning!
The maximum rating of the relay contact is 40 V and 0.8 A.