VCS VideoJet 1000, Manual

Page: 17 / 106

19
VideoJet 1000
Installation
4
Due to its compact design and small footprint, the VideoJet 1000
can be used as a desk top unit occupying minimum space.
Using the mounting shelf unit, Accessory Kit 19“ Rack, it is also
possible to mount the unit into a standard 19“ equipment cabinet.
The following installation requirements must be satisfied:
z
Do not mount the equipment in close proximity to heaters or
other sources of heat. Avoid locations subject to direct sunlight.
z
Allow sufficient space for laying of cables.
z
Ensure adequate ventilation of the equipment. When installing in
equipment cabinets with other equipment, make allowances for
the total heat load.
z
Only use the cables supplied when connecting up the equipment
or, if necessary, use cables suitably screened for interference.
z
Position and lay all cables where they will not be subject to dam-
age and ensure strain relief is provided where necessary.
Warning!
The unit is intended for internal use. Select a suitable location for
installation where the equipment is not subjected to either extreme
temperatures nor to extreme humidity. The ambient temperature
must be between 0 and +50 °C, the relative humidity may not
exceed 80%.
The equipment becomes warm in normal operation. Ensure that
ventilation is adequate and also that there is sufficient clearance
between it and heat sensitive objects or equipment.