Appendix A Connecting Optional Accessories
VCON Desktop Systems Installation and Setup Guide
53
A.4
Connecting a PTZ Camera
VCON Desktop systems support the use of a controllable Pan/Tilt/Zoom (PTZ)
camera. In the Cruiser 384 Executive Edition, the PTZ camera is the standard
camera.
The PTZ camera can be controlled from the Video Window in the MeetingPoint
application (see “Controlling PTZ Camera(s)” of the
MeetingPoint 4.6 User
Guide
).
³
To connect a PTZ camera to the system card’s panel
For specific instructions on installing and operating the PTZ camera, see its
accompanying user’s guide.
CAUTION
Make sure that the camera is turned off.
Escort,
Cruiser 150
1. Connect the yellow-tipped cable between the
camera
VIDEO OUT
connector and the
CAM 2
connector of the system card panel.
2. Connect the Camera Control cable between the
camera
VISCA IN
connector and a free COM port
on the computer.
3. Verify that the camera is connected to a power
supply.
Cruiser 384
1. Connect the S-Video cable between the camera
VIDEO OUT
connector and the
S-VIDEO
connector of the system card panel.
2. Connect the Camera Control cable between the
camera
VISCA IN
connector and a free COM port
on the computer.
3. Verify that the camera is connected to a power
supply.