vc999 TR2, Translation Of The Original Operating Instructions, Page: 51 / 99

Dryer VC999 TR2
Operation
29.11.2013
51/99 Art. No. 594.301
Adjustment of the bottom position for the right bar
1. Press the left button (key is inverted). The right bar makes a reference pass and moves to the
current bottom position. As soon as the bottom position is reached, the left button starts to blink.
2. Use the arrow key to move to the desired lower position.
3. Once the desired position has been configured, press the save button.
The position has now been set. When leaving the screen, the bar automatically moves upward,
makes a reference pass and moves to the home position (top position).
Bar left
Adjustment of the bottom position for the left bar
1. Press the left button (key is inverted). The left bar makes a reference pass and moves to the
current bottom position. As soon as the bottom position is reached, the left button starts to blink.
2. Use the arrow key to move to the desired lower position.
3. Once the desired position has been configured, press the save button.
The position has now been set. When leaving the screen, the bar automatically moves upward,
makes a reference pass and moves to the home position (top position).
Defect mode (photoelectric sensor, communication)
Pressing on the arrow key moves the right bar manually up
and down for adjustment of the bottom position. This func-
tion can only be executed if the left button (reference pass
and move to bottom position) have been performed.
Pressing the save key adopts the position setting.
Fig. 9/29
Defect mode (photoelectric sensor, communication)
Bar right
In the event of a fault in one of these elements the corre-
sponding defect mode switched on so that production can
nevertheless be maintained.
Fig. 9/30
Defect mode (servo right, servo left)
Bar left
When the "Photoelectric sensor" defect mode is switched on, incoming
products are no longer monitored. The machine's internal conveyor belt and
blower run continuously.