vc999 TR2, Translation Of The Original Operating Instructions, Page: 50 / 99

29.11.2013
50/99
Dryer VC999 TR2
Operation
Art. No. 594.301
Rundown time of the conveyor belt
Use this function to set the rundown time of the conveyor belt and the blower. This is the time during
which the conveyor belt continues to run after the product has passed the photoelectric sensor.
Factory setting = 60s
Blwr. I-current (Motor current blower)
Use this function to adjust the motor current for the frequency converter.
Factory setting = 13,800 mA
Manual reference pass
Bar right
This mask provides the following information:

Rundown time of the conveyor belt

Blwr. I-current (Motor current blower)
Fig. 9/26
Tapping the left symbol activates and executes the "manual
reference pass". That means that both bars move to the ref-
erence switch and then leave it again. Then they come to a
halt in that position.
Tapping the right symbol activates and executes the "move
manually to lower position". The bars remain in the lower
position.
Fig. 9/27
Bar right
Rundown time belt, I blower
Pressing on the arrow key moves the right bar manually up
and down for adjustment of the bottom position. This func-
tion can only be executed if the left button (reference pass
and move to bottom position) have been performed.
Pressing the save key adopts the position setting.
Fig. 9/28
Bar left
Manual reference passes