vc999 TR2, Translation Of The Original Operating Instructions, Page: 38 / 99

29.11.2013
38/99
Dryer VC999 TR2
Operation
Art. No. 594.301
9.3.4 Access rights
Access rights for operating the machine via the display are classified into four safety levels. Each
safety level is allocated to a specific group of people who have corresponding access rights for
machine operation, maintenance or repairs:
Password
The functions in safety levels 1-3 can only be edited after entering a password.
Access to passwords is the responsibility of the owner. The operator decides which passwords are
to be given to which individuals.
The procedure for unlocking a safety level via a password is described in chapter "9.5.1 LOG IN".
The procedure for locking a safety level via a password is described in chapter "9.5.2 LOG OUT".
Safety level Password Authorised
persons Functions
0 No password Operator

Starting and stopping the machine

Switchover to continuous operation
1 2002 Supervisor of the
operator

Modify program parameters

Inching function Bar
The access right is reset to safety level 0 when
the machine is switched on and off.
2 0999 Supervisor of the
operator The same as safety level 1, but with the follow-
ing exceptions:
The access right is not reset to safety level 0
when the machine is switched on and off. The
access right for safety level 2 is not reset.
3 3388 VC999 service
technician

Adjusting service parameters

Setting the reference spacing between the
bar and the conveyor belt

Setting defect modes

Review inputs / outputs

Conduct manual reference pass

Manual pass to lower position
Passwords cannot be changed!