manualshive.com logo in svg

VBrick dme, Admin Manual

The VBrick DME Admin Manual is a comprehensive guide that allows users to effectively manage and operate their VBrick DME system. Available for free download on our website, this manual provides step-by-step instructions and valuable insights to optimize your video streaming experience.

Share
Download
background image

DME Admin Guide

177

Chapter 15

Maintenance 

System Maintenance

To access the System Maintenance function:

1. Navigate to 

Maintenance

 > 

System Maintenance

.

Note

: After a power failure the DME may go into read-only 

mode and FTB will be disabled. As a best practice, always run 

Reset with Check Disk

 after a power failure.

Function

Description

Shutdown

This button will perform a graceful shutdown of the DME. It will 
not restart after this action. To restart a hardware DME, toggle the 
physical power switch. To restart a VM, reboot from the VM host.

Reset

This will reset (i.e. reboots) the appliance. A reset does not change, 
save, or reset any configuration parameters.

Note

: RTP UDP Auto Unicast connections from a Vbrick encoder 

are not restored after a System Reset. To restore the connection, 
disable and then enable the RTP transmitter on the encoder. 

Clear Licenses

This will clear all licenses within the DME. This is useful for 
removing DEMO licenses, which are only good for 31 days. Use 
this button to clear a demo license and activate a feature before 
your demo license has expired. After clearing any licenses, please go 
to Activate Feature to activate a new license. 

Summary of Contents for dme




























































































































































































































Reviews:

No comments

Related manuals for dme

Nanni N13.430 CR2 Operator'S Manual preview
N13.430 CR2
Brand: Nanni Pages: 110
DCCconcepts Cobalt IP Analog Owner'S Manual preview
Cobalt IP Analog
Brand: DCCconcepts Pages: 2
Parker PGM 500 Series Service Manual preview
PGM 500 Series
Brand: Parker Pages: 32
Bartec Varnost 4KTCR 250 Directions For Use Manual preview
4KTCR 250
Brand: Bartec Varnost Pages: 48
Toyama TDE110TB-XP Owner'S Manual preview
TDE110TB-XP
Brand: Toyama Pages: 44
TIS TIS-TM120 Installation Manual preview
TIS-TM120
Brand: TIS Pages: 12
Rega 24 v High Performance Synchronous Motor Upgrade Fitting Instructions preview
24 v High Performance Synchronous Motor
Brand: Rega Pages: 1
MerCruiser Sterndrive TDI 3.0L User Manual preview
Sterndrive TDI 3.0L
Brand: MerCruiser Pages: 119
YS DZ170 Operator'S Manual preview
DZ170
Brand: YS Pages: 2
Sisu Diesel 320 Workshop Manual preview
320
Brand: Sisu Diesel Pages: 116
Detroit Diesel 92 Series Operator'S Manual preview
92 Series
Brand: Detroit Diesel Pages: 42
Honda Car engines GX640 Owner'S Manual preview
Car engines GX640
Brand: Honda Pages: 33
Honda 75 Twin Owner'S Manual preview
75 Twin
Brand: Honda Pages: 38
Honda 75 Owner'S Manual preview
75
Brand: Honda Pages: 39
Honda G300 Owner'S Manual preview
G300
Brand: Honda Pages: 7
WilTec 62000 Operation Manual preview
62000
Brand: WilTec Pages: 6
WilTec 92671 User Manual preview
92671
Brand: WilTec Pages: 12
Alutech AM0/06-28 Operation Manual preview
AM0/06-28
Brand: Alutech Pages: 32

Brands by name

Popular brands

Load more brands