VBrick dme, Admin Manual

Page: 170 / 219

158 © Vbrick Systems, Inc.
Create or Edit a VC Gateway Outgoing Line
Outgoing Lines

To access the VC Gateway Outgoing Lines fields:
1. Navigate to
VC Gateway Configuration
>
Outgoing Lines
.
The DME can also initiate a call into a videoconference. When the DME initiates a call to the
remote video conferencing system, the VC Gateway is configured using the Outgoing Lines
pages.
The Outgoing Lines page shows the line table. This table shows the current state of all
available outgoing lines.
VEMS Categories VEMS metadata. The categories that the recorded stream will be
associated with. These categories are determined by the
configured VEMS Mystro User.
Note: If category permissions are changed on the VEMS Mystro
server, it may take up to 30 minutes before the updated categories
are shown on this DME page.
VEMS
Reference Material Link VEMS metadata only. This will add a link to a web page on the
Reference Material tab.
• Title – Descriptive name for URL.
• URL – Fully qualified path to a web page.
Note : The Incoming and Outgoing Details pages have an OK
button (in addition to Apply, Revert, and Default). Use the OK
button to save changes and exit back to the previous page. Use the
Apply button to save changes without leaving the Details page.
This makes it easy to edit a different line without leaving the Details
page.
Field Description