manualshive.com logo in svg

VBrick 9000 Series, Admin Manual

Share
Download
VBrick 9000 Series Admin Manual Download Page 58

50

© 2015 VBrick Systems, Inc.

Archivers

Global

To access the 

Global

 fields:

1. Navigate to 

Encoder Configuration

 > 

Global

.

The 

Global

 page is used to configure global parameters for the encoder. This includes the 

number of streams, transmitters, servers, and archivers that will be available for 
configuration. 

Field

Description

Number of  Programs 
Available

Read-only. 1, 2, or 4. VBrick 9000 Series encoders currently 
include models with 1, 2, or 4 channels. There will be one 
program available for each channel. Presenter Mode only has 
1 program available regardless of the number of inputs.

Number of  Streams

1–16. Default = 1-4. You can define up to 16 streams. 
Default depends on model. 

Number of  Transmitters

0–25. Default = 1-4. You can define up to 25 transmitters. 
Default depends on model.

Number of  Servers

0–16. Default = 1-4. You can define up to 16 servers. Default 
depends on model.

Number of  Archivers 

0–4. Default = 1. You can define up to 4 archivers.

Global Override

This option overrides all individual transmitter and server 
"enable" settings. Use to quickly shutdown transmitters and/
or servers.

• No Override – default. 
• Disable All – disable transmitters and servers.
• Disable Transmitters – disable transmitters only. 
• Disable Servers – disable servers only. 

Summary of Contents for 9000 Series

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands