XTi- VBox Android TV Gateway User
Manual
5
. Setting up XTi-VBox TV Gateway using the Web Interface
4.2
. Accessing XTi-VBox TV Gateway from Mac OS X
10
5
Setting up XTi-VBox TV Gateway using the Web Interface
When configuring your XTi device for the first time, it is recommended to choose the
Quick Setup
option
NOTE
: You can later customize this quick setup, by re-launching the interface and clicking
Manage
.
The
Quick Setup Wizard
is displayed, guiding you through the steps listed on the left panel (Figure 6).
In this section:
Error! Reference source not found.
Error! Reference source not found.
Channels Setup
allows you to select the channels whose broadcasts you wish to receive (
Figure 8: Quick Setup Wizard – Step 3: Channels Setup page
Configure your channels setup as explained in
Error! Reference source not found.
Table 4: Quick Setup Wizard – Step 3: Channels Setup page
Select the channels whose broadcasts you wish to receive:
Manual selection - check the boxes of specific channels.
Once you select a channel, you can customize it as follows:
– set the channel’s position on the channels list:
channel up or down (respectively), one step at a time
icon to show the channels order list:
You can now select the channel’s position on the list.
) is updated according to your order
– shows the channel name. You can override this
Language: A-Audio, S-Subtitles
– set the Audio language list (A)
and Subtitles language list (S) to your preferred languages
Display only Selected
Channels
Narrows down the Channels list by showing only selected channels.