191127
W
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Hardware Package (included):
Mounting Screw (B)
Rubber Pad (E)
Cross Bar Unit (A)
Wire Connector (C)
Bolt Nut (D)
T0541 / T0543
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
Installation steps
1. Remove the two bolt nuts (D)
,
the two rubber pads (E)
and the cross bar unit (A) from the backplate.
2. Attach the cross bar unit (A) to the outlet box using
two mounting screws (B). Adjust the length of the
preinstalled headless screws if necessary.
Note: Make sure that the headless screws are lined
up horizontally to make the fixture level.
Turn off the power at fuse or circuit box.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.
Wire Connector (C)
House Grounding Wire
Outlet Box
Mounting Screw (B)
Green Grounding Screw
Headless Screw
Cross Bar Unit (A)
Fixture Wire
Fixture Grounding Wire
Backplate
Bolt Nut (D)
Rubber Pad (E)
Socket
Glass Shade
Metal Frame
Set Screw x 3
Fixture
Max.60W Type T Bulb
(not included)
