Outlet Box
Set Screw
Mounting Screw (B)
Cross Bar (A)
Wire Connector (C)
Green Grounding Screw
Canopy
Swivel
Light Head
G45 LED Bulb Max.4W (D)
（
included
）
Glass Shade (E)
Hand Screw (F)
Cross Bar (A)
Mounting Screw (B)
Wire Connector (C)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0213
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
181206
Turn off the power at fuse or circuit box
Installation Steps
3. Attach the canopy to the cross bar (A) by aligning
G45 LED Bulb Max.4W X 6 (D) Glass Shade X 6 (E)
1. Rotate the movable rod to the desired position of the canopy, then align the hand screw (G) to the desired hole and
tighten hand screw (G) .
2. Attach the cross bar (A) to the outlet box by using two mounting screws (B).
3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections by using the wire
connector (C) as follows.
--- Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.
--- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.
--- Attach the fixture grounding wire to the cross bar (A) with the green grounding screw.
Then connect it to the house grounding wire with a wire connector (C).
Carefully put the wires back into the outlet box.
Hand Screw (G)