Vax SteamFresh REACH, Manual

Page: 18 / 84

Let’s talk technical Taking care of your machine
Cleaning the Nano Head
Replacing the hard water filter
Press the steam wand release
pedal and pull the steam wand
and handheld out of the floorhead.
Remove any dirt /debris from the
brushes and wash under running
water (max 40 ⁰C) Leave to dry
before re-fitting the nano head
onto the steamer.
Pull to remove the nano head
from the floorhead.
Press the twin tank release button
grip the twin tank and pull to
remove tanks.
Use your thumb and index finger
to grip the hard water filter.
Pull the hard water filter towards
you to remove.
Hard water filter should be
replaced every 3 to 6 months.
CAUTION: Switch off the steamer and unplug from the mains. Allow the steamer to fully cool down before performing
any maintenance or troubleshooting checks.
IMPORTANT: Don’t operate the steamer without hard water filter in place. The condition of the filter affects the
performance of your steamer, check and change filter periodically. Depending on water hardness and frequency
of use, the filter should be changed every 3 to 6 months.