Vax SteamFresh REACH, Manual

Page: 14 / 84

Using your machine Using your machine
Standing behind the
unit, press the handheld
release buttons and
carefully release the
handheld from the
steam wand.
Place the steam wand
safely and securely
to one side against
a wall or fixed structure.
Push the concentration
tool onto the handheld
and twist clockwise
to lock into position.
Plug into mains and
slide the On/Off switch
to on. The green light will
illuminate when it is ready
to use. The steamer will
automatically set to Max
steam (no detergent).
2. ROTATE
1. PUSH
CAUTION: Always switch off the steamer and allow to cool before attaching/detaching the steam wand, floorhead,
accessories and twin tank. Always stand securely against a wall/fixed structure or lie the steamer flat on the floor.
When using the steam reach wand do not aim towards electrical components such as light fittings, sockets and wiring.
IMPORTANT: Always check the tools are clean and free from debris, don’t use if damaged, broken or worn.
Using the steam fresh reach handheld
Press the button
on the control panel
to select preferred
setting steam/detergent.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the
trigger continuously
to prevent over wetting.
To re-attach the handheld to
the reach wand, grip the top
of the steam wand, remove
the concentration tool and line
up handheld with steam wand
and push down firmly until
handheld clicks into place.
TIP
To improve your comfort,
use the additional
handgrip on the handheld
to support the unit and
help you clean
difficult to
reach areas.