Using your machine
Using the wash tool
Pull down the accessory hose connector cover.
Push the hose end into the hose and solution connection
port until it clicks into place.
Slide the upholstery tool
over the tab at the end
of the hose until it clicks
into place.
Plug into the mains, press
the On/Off button to
switch on.
NOTE:
The carpet washer should be in the upright position when using the hose and tools; this will de-activate
the brushbar.
Taking care of your machine
TIP
For best results do not over
saturate. For a dryer finish,
follow with a slow additional
dry stroke without the
trigger pressed.
Squeeze the solution trigger to release water and solution
mix. Squeeze the trigger on the forward stroke, then
release the trigger on the backward stroke to pick up
the solution/water. For a dryer finish, follow with a slow
additional dry stroke without the trigger pressed.
