Getting started
Operating the appliance
Switch vacuum cleaner on
Operating the appliance and accessories
1
2
Assembling your vacuum cleaner
NOTE:
The crevice tool, dusting brush and upholstery tool can all be attached to the telescopic tube or to the handle.
IMPORTANT:
Do not use the vacuum cleaner without all of the filters in place.
CAUTION:
The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket, make sure
the switch is in the ‘off’ position. Hold the vacuum cleaner firmly when starting and in use.
NOTE:
Fully unwind power cord before every use. A yellow mark on the cord indicates the recommended cord
length. Do not exceed the cord length beyond the yellow mark.
NOTE:
For convenience there is a parking slot located at the rear of the vacuum cleaner where the floor tool
and tubes can be attached for storage and carrying.
IMPORTANT:
The condition of the filters affects the performance of your
machine. Please check and clean filters periodically (depending
on the level of use). For full cleaning instructions, see page 5.
1
2
4
vax.co.uk
