Storage
89
The handle in the front has to be in the
tightened position. Place the rear of
the multifunctional table on the rail
and tip the front down. Slide the
multifunctional table until it engages.
9
Warning
Never use the multifunctional table
in the unfolded position while the
vehicle is in motion. Any objects
on the table will turn into
projectiles in the event of a sudden
stop or collision.
Ensure that the multifunctional
table is correctly folded before
moving or removing it.
Never use the tables as seats or
lean on them.
Check that there is no object
obstructing the rail and preventing
locking.
Roof rack system
Roof rack
For safety reasons and to avoid
damage to the roof, the vehicle
approved roof rack system is
recommended. For further
information contact your workshop.
Follow the installation instructions
and remove the roof rack when not in
use.
The roof load is the combined weight
of the roof rack and the load.
Loading information
Mounting
Fasten the roof rack according to the
installation instructions delivered with
the roof rack.
The number and location of the
mounting points may vary depending
on the vehicle:
Vehicles with glass panel
Mount two roof bars using the
mounting points marked in the
picture.
Permissible roof load L1, L2, L3 max.
100 kg.
Summary of Contents for Vivaro C
