Lighting
137
Manual path lighting
To switch on the manual path lighting,
switch off the ignition, open the
driver's door and pull the indicator
lever.
If the driver's door is not closed, the
lights switch off after several seconds.
To switch off the manual path lighting
pull the lever again while the driver's
door is open.
The duration of the path lighting can
be set in the vehicle personalisation
119.
Automatic path lighting
Path lighting is activated, when the
ignition is switched off and the driver's
door is opened.
This function can be activated or
deactivated in the vehicle
Info Display
Vehicle locator lighting
This function allows to locate the
vehicle, e.g., in weak lighting
conditions using the remote control.
The headlights come on and the turn
lights flash for 10 seconds.
Press
N
on the remote control.
The vehicle must be locked more than
5 seconds.
Peripheral lighting
Peripheral lighting allows you to
switch on the position lights, low
beam and number plate lighting using
the remote control.
Press
D
on the remote control to
switch on peripheral lighting.
Press
D
a second time to switch off
peripheral lighting.
Battery discharge protection
To prevent discharge of the vehicle
battery when the ignition is switched
off, some interior lights are switched
off automatically after some time.
Summary of Contents for Vivaro C
