Vauxhall New Crossland, Owner'S Manual

Page: 130 / 299

128 Infotainment system
Interrupting a voice prompt
As an experienced user, you can
interrupt a voice prompt by briefly
pressing
Y
on the steering wheel.
Alternatively you can say "Set
dialogue mode as expert".
A beep is heard immediately, and a
command can be stated without
having to wait.
Cancelling a dialogue sequence
To cancel a dialogue sequence and
to deactivate the speech recognition,
press
6
on the steering wheel.
If you do not say any command for a
certain period of time, or if you say
commands that are not recognised by
the system, a dialogue sequence is
automatically cancelled.
Operation via speech commands
Follow the instructions given by voice
output and shown on the display.
For best results:
● Listen for the voice prompt and
wait for the beep before saying a
command or replying.
● Read the example commands on
the display.
● The voice prompt can be
interrupted by pressing
Y
again.
● Wait for the beep and then speak
the command naturally, not too
fast, not too slow.
Usually commands can be spoken in
a single command.
Voice pass-thru application
The voice pass-thru application of the
Infotainment system allows access to
the speech recognition commands on
your smartphone.
Voice pass-through is available via
the phone projection applications
Apple CarPlay and Android Auto.
Activating speech recognition
Press and hold
Y
on the steering
wheel until a speech recognition
session is started.
Adjusting the volume of voice
prompts
Turn
)
on the control panel or press
volume button on the steering wheel
upwards (increase volume)
Y
or
downwards (decrease volume)
Z
.
Deactivating speech recognition
Press
6
on the steering wheel. The
speech recognition session is ended.
Phone
The phone function provides you with
the possibility of having mobile phone
conversations via a vehicle
microphone and the vehicle
loudspeakers as well as operating the
most important mobile phone
functions via the Infotainment system
in the vehicle. To be able to use the
phone function, the mobile phone
must be connected to the
Infotainment system via Bluetooth.
Not all phone functions are supported
by every mobile phone. The usable
phone functions depend on the
relevant mobile phone and network
provider. You can find further
information on this in the operating