Vehicle care
159
2. Pull the brake light assembly out
carefully.
3. Remove the bulb carrier by
pinching the two tabs inwards.
4. Remove the faulty bulb by pulling
on it.
5. Renew bulb.
6. Install brake light assembly like
explained above, in reversed
order.
Number plate light
1. Insert a screwdriver in one of the
recesses of the cover and lever it
out. Remove the cover.
2. Pull the bulb from the bulb holder
and replace it.
3. Attach the cover.
Electrical system
Fuses
A defective fuse must be replaced by
a workshop.
