Vauxhall Movano 2021 Owner'S Manual Download

Page: 73 / 211

Lighting

Turn lights

: right turn lights

down : left turn lights
A resistance point can be felt when

moving the indicator lever.
Constant flashing is activated when

the indicator lever is being moved

beyond the resistance point. It is

deactivated when the steering wheel

is moved in the opposite direction or

the indicator lever is manually moved

back to its neutral position.

Activate temporary flashing by

holding the indicator lever just before

the resistance point. Turn lights will

flash until the indicator lever is being

released.
To activate five flashes, tap the

indicator lever briefly without passing

the resistance point.

Front fog lights

Turn the adjuster wheel in position

Operated by pressing

Light switch in position

: switching

on the front fog lights will switch the

headlights on automatically.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands