manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

The Vauxhall Movano 2021 Owner's Manual is your comprehensive guide to operating and maintaining this exceptional vehicle. Gain access to vital information, troubleshooting tips, and detailed instructions, all available for free download at manualshive.com. Maximize your Movano's potential with this essential manual, ensuring a smooth and enjoyable ownership experience.

Share
Download
background image

64

Instruments and controls

Trip computer

The trip computer displays current trip

information since the last reset.

To view the current trip information,

press TRIP.
The following information will be

displayed:

● range
● distance
● average consumption
● current consumption
● average speed
● duration

Additionally, Trip B can be activated

via the Driver Information Centre or

Info Display.
To reset the trip computer, select the

respective entry in the Driver

Information Centre via the MODE

button.
The trip computer screen can be

closed by pressing TRIP for more

than a second.

Trip computer with touchscreen

audio system

The trip computer can also be reset

via the Info Display. Press MORE on

the Infotainment panel, open the

menu for trip information and touch

and hold Trip A or Trip B until the

value resets to 0.

Tachograph

If the vehicle is equipped with a

tachograph, it will be located in the

overhead console.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Related manuals for Movano 2021

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
FALCON RIDGE BC-3400-FC05 Instructions For Installation And Care preview
BC-3400-FC05
Brand: FALCON RIDGE Pages: 7
Volvo 2004 C70 HPT User Manual preview
2004 C70 HPT
Brand: Volvo Pages: 30
Tellur BASIC TLL171231 User Manual preview
BASIC TLL171231
Brand: Tellur Pages: 5
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3

Brands by name

Popular brands

Load more brands