148
Vehicle care
To gain access to the tank cap,
remove the protective cover by
turning the three fixing screws a
quarter of a turn.
If the cooling system is cold, the
coolant level should be above the
MIN mark. Top up if the level is low.
9
Warning
Allow the engine to cool before
opening the cap. Carefully open
the cap, relieving the pressure
slowly.
To top up, use a 1:1 mixture of
released coolant concentrate mixed
with clean tap water. If no coolant
concentrate is available, use clean
tap water. Install the cap tightly. Have
the coolant concentration checked
and have the cause of the coolant
loss remedied by a workshop.
Washer fluid
To access the filler cap, pull the
telescope filler neck and unclip the
cap.
Fill with clean water mixed with a
suitable quantity of approved
windscreen washer fluid which
contains antifreeze.
