manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

Share
Download
Vauxhall Movano 2021 Owner'S Manual Download Page 123

Driving and operating

121

Due to adverse weather conditions

such as heavy rain, false detections

may occur.

Fault

In the event of a fault, the LEDs in the

exterior mirrors are either illuminated

continously or extinguished.

Additionally, a warning message is

displayed in the Driver Information

Centre and a warning chime may

sound.
Seek the assistance of a workshop.

Rear view camera

The rear view camera assists the

driver when reversing by displaying a

view of the area behind the vehicle.

9

Warning

The rear view camera does not

replace driver vision. Note that

objects that are outside the

camera's field of view and the

parking assist sensors, e.g. below

the bumper or underneath the

vehicle, are not displayed.

Do not reverse or park the vehicle

using only the rear view camera.
Always check the surrounding of

the vehicle before driving.

The system uses:

● rear view camera, located at the

rear top end of the vehicle

● ultrasonic parking sensors in the

rear bumper

The view of the camera is displayed

in the Info Display 

3

 62.

The area displayed by the camera is

limited. The distance of the image that

appears on the display differs from

the actual distance.

Switching on

The rear view camera is automatically

activated when reverse gear is

engaged and it remains active up to

approx. 9 mph.
The rear view camera will also be

activated with the vehicle stationary,

when the rear doors are opened.

Switching off

The camera is switched off when a

forward gear is engaged.

Guidelines

The area behind the vehicle is

displayed in the screen. The vertical

lines represent the width of the

vehicle with mirrors unfolded.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands