62
■ turn the lock hooks on both sides to
the rear and push down the lashing
eyes in the recesses,
■ raise the storage box and place it
on the folded backrests,
■ remove storage box out of the load
compartment.
Installation
■ Place storage box on the folded
backrests,
■ lower the box in the load
compartment,
■ open the storage box,
■ raise the lashing eyes on both sides
and turn the lock hooks to the front
to fix the box to the lashing eyes,
■ raise rear backrests and install load
compartment cover,
■ if equipped, stow the suitcase with
tyre repair kit in a chamber of the
storage box,
■ close and lock the cover.
Do not place any objects on the cover.
Opening
Lift up the cover at the rear end. It
engages in a nearly vertical position.
Further opening up to head restraints
is possible. To close, move down the
cover beyond the engage point.
Removing
Push cover upwards at the left and
right from the lower side and remove.
Fitting
Engage cover by pushing into guides
on both sides.
Summary of Contents for KTA-2744/2-VX-en
