116
Press button
4
to activate air
recirculation mode. Activation is
indicated by the LED in the button.
Press button
4
again to deactivate
recirculation mode.
9
The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling the air
humidity increases, so the
windows may mist up from inside.
The quality of the passenger
compartment air deteriorates,
which may cause the vehicle
occupants to feel drowsy.
In warm and very humid ambient air
conditions, the windscreen might mist
up from outside, when cold air is
directed to it. If windscreen mists up
from outside, activate windscreen
wiper and deactivate
s
.
Basic settings
Some settings can be changed in the
Info-Display. Vehicle personalisation
Air vents
At least one air vent must be open
while the cooling is on.
Adjust the air amount at the vent
outlet by turning the adjuster wheel.
The vent is closed when the adjuster
wheel is turned close to the left or
right.
Direct the flow of air by tilting and
swivelling the slats.
9
Do not attach any objects to the
slats of the air vents. Risk of
damage and injury in case of an
accident.
Additional air vents are located
beneath the windscreen and door
windows and in the foot wells.
Summary of Contents for KTA-2744/2-VX-en
