Vauxhall INSIGNIA 2017, Owner'S Manual

Page: 251 / 323

Vehicle care 249
4. Turn the bulb socket
anticlockwise and remove it from
the light assembly.
5. Disengage the plug connector by
pressing the retaining lug.
6. Remove and replace the bulb unit
and attach the plug connector.
Note that the bulb and the socket
are one unit and have to be
changed together.
7. Insert the bulb socket into the light
assembly by turning clockwise
and engage.
8. Mount the light assembly by
tightening the three screws.
9. Attach the faceplate and tighten
the screw.
10. Grand Sport, Sports Tourer
Attach and engage the cover.
Tail lights
Tail lights and brake lights are
designed as LEDs. In case of failure,
have LEDs replaced by a workshop.
Turn signal lights, rear fog lights and
reverse lights are designed for bulbs
and can be changed as follows.
Grand Sport
Light assembly in the body
1. Remove the cover on the
respective side.
2. Unscrew the two plastic securing
nuts from the inside by hand.