230
Vehicle care
3. Allow both engines to idle for
approx. three minutes with the
leads connected.
4. Switch on electrical consumers
e.g. headlights, heated rear
window of the vehicle receiving
the jump start.
5. Reverse above sequence exactly
when removing leads.
Towing
Towing the vehicle
Remove the cap.
The towing eye is stowed with the
vehicle tools
Screw in the towing eye as far as it will
go until it stops in a horizontal
position.
Attach a tow rope – or better still a tow
rod – to the towing eye.
The towing eye must only be used for
towing and not for recovering the
vehicle.
Switch on ignition to permit operation
of brake lights, horn, windscreen
wiper and, depending on version, to
release the steering wheel lock.
Summary of Contents for Grandland
