
Instruments and controls
85
The portable device to be charged
must be compatible with the Qi
standard, either by design or by using
a compatible holder or shell. The
charging zone is identified by the Qi
symbol.
To charge a device, the ignition must
be switched on.
To charge a mobile device:
1. Remove all objects from the
charging device.
2. Place the mobile device with the
display facing upwards on the
charging device in the storage.
Charging status is indicated in the
LED: illuminates green, when mobile
device is charging.
Protective cover for the mobile device
could have impact on the inductive
charging.
In the event that the mobile device is
not charging properly, rotate it 180°
and place it on the charging device
again.
Cigarette lighter
The cigarette lighter is freely
accessible.
Depending on version, the cigarette
lighter may be located behind the
storage cover. Press cover to open.
Press in cigarette lighter. It switches
off automatically once the element is
glowing. Pull out cigarette lighter.
Ashtrays
Caution
To be used only for ash and not for
combustible rubbish.
A portable ashtray can be placed in
the cupholders.
Summary of Contents for COMBO
