
230
Driving and operating
4. Unscrew protective cap from the
filler neck.
5. Open AdBlue canister.
6. Mount one end of the hose on the
canister and screw the other end
on the filler neck.
7. Lift the canister until it is empty, or
until the flow from the canister has
stopped. This can take up to five
minutes.
8. Place the canister on the ground
to empty the hose, wait 15 s.
9. Unscrew the hose from the filler
neck.
10. Mount the protective cap and turn
clockwise until it engages.
Notice
Dispose of AdBlue canister
according to environmental
requirements. Hose can be reused
after flushing with clear water before
AdBlue dries out.
Electric drive unit
The vehicle uses an electric drive unit
with a 1-gear transmission.
P : park position
R : reverse mode
N : neutral mode
D : automatic mode
B : automatic mode with one-pedal
driving
After selecting a mode, the selector
will return to the centre position. The
selected mode is indicated in the
Driver Information Centre.
Summary of Contents for COMBO
