
212
Climate control
Two starting times for the operation of
the parking heater can be
programmed.
Press Time 1 or Time 2 to select the
desired timer and then press
ü
.
Define the time by pressing
z
Time
1 for the timer one or
z
Time 2 for the
timer two.
Press
ü
to save the settings.
Activate / deactivate the
programming
Press State.
Activate or deactivate Temperature
conditioning by pressing ON or
OFFand then press
ü
.
Only one starting time can be
activated.
Parking heater via remote control
The parking heater can be switched
on or off using a remote control.
Press
ì
. The parking heater is
activated.
Press OFF. The parking heater is
deactivated.
Replacing the battery in the remote
control
If the indicator light of the remote
control turns yellow, the charging
status of the battery is weak. If the
indicator light does not illuminated
anymore, the battery is discharged
and has to be replaced.
1. Remove the cap of the remote
control by unscrewing it with a
coin and remove the battery
2. Replace battery with a battery of
the same type. Pay attention to
the installation position.
3. Screw the cap in its place .
Temperature
preconditioning
The temperature preconditioning
allows to heat the vehicle's interior
and to ventilate the vehicle's interior
with ambient air.
Summary of Contents for COMBO
