Vatech Premium PAX-i3D User Manual Download Page 121

Page: 121 / 204

9. Acquiring Dental CT Images

PCT-90LH User Manual

115

LISH

9.6

Checking the captured image

Acquired images can be reconstructed and converted to DICOM format.

The exported images can be confirmed in

EzDent-i

Refer to the

EzDent-i User Manual

for more information.

The images are transferred to

EzDent-i

automatically.

The images are automatically saved if automatic save option is configured as default. If

it is not configured as default, click

Save

button to save the images.

To check the image, double-click the one on the Patient list.

Then,

Ez3D-i

will run automatically for 3D viewing.

Summary of Contents for Premium PAX-i3D













































































































































































































Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands

Vatech Premium PAX-i3D, User Manual

Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands