Vatech Premium PAX-i3D User Manual Download Page 113

Page: 113 / 204

9. Acquiring Dental CT Images

PCT-90LH User Manual

107

LISH

9.4

Patient Positioning

9.4.1 Dental CT mode

Patient Positioning

Let the patient hold the handle in comfortable posture and see front.

Patients need to keep the following poses during imaging process.



Sit close against the chair.



Hold the handle.



See front.



Close the mouth.



Breathe through the nose.



Keep both shoulders parallel.



Relax the body.



Straighten the Cervical Vertebra.

Adjust the height of the Chinrest by using the Chinrest

UP/DOWN

button on the

Control Panel until the patient’s chin is placed comfortably on the Chinrest.

Align the Vertical Beam to the center of the patient's face.

Summary of Contents for Premium PAX-i3D













































































































































































































Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands

Vatech Premium PAX-i3D, User Manual

Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands