Vatech PaX-i Plus PCH-30CS, User Manual

Page: 44 / 249

3. Acquiring PANO Images
36 PaX-i Plus User Manual
3.3 X-ray Exposure

If an emergency occurs during image acquisition, release
the Exposure Switch to cease X-ray emission.

The operator shall observe the X-ray safety regulations
applicable to his/her area at all times during the operation
of this equipment.

The operator must keep vocal/visual contact with the
patient at all times during image acquisition process.

Do not operate the PC during exposure. Doing so may
cause the system to malfunction.

Let the patient close the eyes during the operation.

To acquire optimized images, instruct the patient to hold
his/her breath and not to swallow. Also don’t let the
patient move until the Temple Supports are open.
1. Get out of the X-ray room and close the door.
2. Press and hold down the Exposure Switch until image acquisition is completed.
The image appears on the screen.