Vatech GREEN SMART User Manual Download Page 133

Page: 133 / 200

10. Acquiring 3D MODEL Scan Images

Green Smart User Manual 125

LISH

10.5 Checking the Captured Images

Acquired images can be reconstructed and converted to DICOM or STL (Stereo

Lithography) format.

Refer to the

EzDent-i User Manual

for more information.

The images are transferred to

EzDent-i

automatically.

The images are automatically saved if automatic save option is configured as default. If it

is not configured as default, click the

Save

button to save the images.

To check the image, double-click the one on the

Patient List

You can check the captured image with a 3

party STL viewer.

Summary of Contents for GREEN SMART









































































































































































































Search results

Summary of Contents for GREEN SMART

Reviews:

Related manuals for GREEN SMART

Brands by name

Popular brands

Vatech GREEN SMART, User Manual

Search results

Summary of Contents for GREEN SMART

Reviews:

Related manuals for GREEN SMART

Brands by name

Popular brands