Vatech Green 16, Installation Manual

Page: 147 / 162

Appendix
Green16/18 Installation Manual 139
En
glis
h
B. Installing the Emergency Stop Switch

Install the Emergency Stop Switch in the power cable line.

Install this switch, so it is easy to reach in the emergency case but can’t be
pushed by mistake.

The switch shall be a type of mistake-proof.

The switch is not supplied.]

The switch shall be installed at the height of 1.2 to 1.5 meters (47 to 60”).
1. The cable sizes: N, L, and PE≥ 12 AWG (3 x 4 mm
2
).
2. The cable to Emergency Stop Switch shall be the same size as the power cable
itself.
3. Install the socket connector terminal for the 2nd protective ground wire.