Installation, Operating & Maintenance Instructions
Series 77.1, DN 63-160 CF-F (I.D. 2½“- 6")
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected]
www.vatvalve.com
283762EA
2010-04-21
1/11
Fast closing valve
with pneumatic actuator
This manual is valid for the valve ordering number(s):
77136- . E44- . . . .
77140- . E44- . . . .
77144- . E44- . . . .
The fabrication number is indicated on each product as per the label
below (or similar):
made in Sw itz er land
F abric ation N o.:
patented
. .
771 . . – . . . . – . . . . / . . . .
A – . . . . . .
Fabr icatio n n um be r
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air
lines. Do not touch parts under voltage!
Wear gloves!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!