Re-licensing
8.7
Re-licensing for a Change of IP Address or Replacement
Caution
Re-licensing is not possible until you have contacted the supplier of your IDENTIKEY Appliance. See
the information on support in section
The procedure for re-licensing with a change of IP address or for a backup restored to a different appliance, (e.g.
for a replacement) requires:
1.
Contact your IDENTIKEY Appliance supplier for release of the appliance from its initial license.
2.
Accessing the Licensing wizard as described above in
3.
Completing the Licensing wizard for a Commercial License, as explained in
Tip:
The full procedure for setting up a replacement appliance is explained in section
IDENTIKEY Appliance Installation and Maintenance
75