INSTRUCTIONS AND MAINTENANCE MANUAL
MAC R MOTORS
PAGE:
11
CODE: CTT12 EDITION: 01 DATE: MAY 2013
Subject to technical changes without prior notice
3.2
Reference standards
The MAC R motors are designed and manufactured according to the Low Voltage Directive 2006/95/CE and they
are to be used in industrial installations as incomplete machinery or machinery component, as provided in the
Machines Directive 2006/46/CE.
The following table summarises the main reference technical standards that have been taken into account for the
design of these motors:
Standard
Description
IEC/EN 60034-1
Dimensioning and behaviour in operation
IEC/EN 60034-2
Method for determining losses
IEC/EN 60034-5
Protection rating
IEC/EN 60034-6
Cooling
IEC/EN 60034-7
Mounting
IEC/EN 60034-8
Marking on terminals and direction of rotation
IEC/EN 60034-9
Noise emissions
IEC/EN 60034-11
Thermal protection
IEC/EN 60034-14
Mechanical vibration levels
IEC/EN 60034-18
Insulation evaluation
TS 60034-17
Technical specifications for the use of asynchronous motors
with frequency converters
IEC/EN 60072-1
Power series and dimensions of rotating electrical machines
Table 2: Reference standards
In accordance with the current Machines Directive, the start-up of these motors is prohibited in the European
Union until the conformity of the installation has been confirmed on the machine that is to be installed (see EN
60204-1). If the electrical machine is to be used outside the European Union, the specific laws of the country in
which it is located will apply. Furthermore, safety standards, local installation and sector-specific standards must
be applied.
