OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PAGE: 5
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
1.
LEGAL NOTES AND SAFETY INSTRUCTIONS
1.1
Justification
VASCAT motors contain low-voltage parts and rotating elements that make them hazardous; they also contain hot surfaces.
Users must take notice of all the hazard warning signs described in this manual (see section 1.3).
All the work related to the transport, connection, start-up and maintenance must be performed by responsible, qualified personnel
(in accordance with the EN 50110-1 (VDE 0105-100) and IEC 60364 standards). Incorrect procedures may cause serious
personal injury and material damages.
VASCAT motors may only be used for the purposes specified in section 0.
Furthermore, the conditions in the place where they are used must meet all the requirements given on the specifications plate
and in this document.
1.2
Users and purpose
The purpose of the operation manual is to provide all the information required for the appropriate mounting, commissioning and
maintenance of the ID motors and avoid hazards that may cause serious injury. This manual is for any person or individual
working with the motors to which it refers or who assume responsibility for their operation.
All individuals working with ID series C.C. motors must have this manual at their disposal and they must follow the relevant
instructions and indications.
The service instructions must be read carefully before using the machine. This will guarantee correct operation free from hazards
and complications and will extend the service life of the machine.
These service instructions give a description of the machine and information on its correct operation from delivery to the end of its
service life.
This manual must always be complete and perfectly legible.
