background image

 

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION. PLEASE 

READ AND KEEP FOR FUTURE REFERENCE. 

VAS Furniture Mfg., Inc.   

 

 

 Page 1 

 

                  Factory # 33-10944 

 

 

                                           

 

 

3-IN-1 Gaming Theater

TM

 Console 

Model # XLGTS46-1LC 

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your 
needs. DO NOT discard any of the hardware or parts that you will not use on your set option, this 
will give you the opportunity to use this TV Console for different configurations in case you decide 
to upgrade your TV set in the future.

 

 
 
 
 
 
 
 

 
 

 

 
                                           

 

 

 

 

 
 
 
 
 
 

 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if you are missing parts, do not return this item to 
the store where it was purchased. Please call our toll-free customer service number and have your 
instructions and parts list ready to provide the model name, part name or factory number:  

 

1-866-942-5362        8:30 a.m. - 4:30 p.m. PST, Monday - Friday 

ONLINE:  

www.whalenfurniture.com

 

 

EMAIL: 

[email protected]

 

 

 

Video Instruction Guides  

Go to 

http://whalen.showuhow.com

 to view step-by-step instructional 

videos for assembling and installing your product. Enter the following 
product number on the ShowUhow homepage.

 

 
 
 

LOT NUMBER:      

 

 

DATE PURCHASED:    /    /    

XLGTS46-1LC 

Summary of Contents for XLGTS46-1LC

























Reviews: