background image

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

VAS Furniture Mfg. Inc. 

 

 

       Page 1   

    

 

  Factory No. 56-12089

 

                                            
 

 

 

 

Flat Panel Console with Swinging Floater 
Model # PRO44-1TC 

 

  
 

 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
                                                                                            

 

 

 

 

 

 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if you are missing parts, do not return this 
item to the Retailer Store. Please call our toll free customer service number and have your 
instructions and parts list ready to provide the model name, part name or factory number:  

 

001-866-942-5362 

    8:30 a.m. - 4:30 p.m. PST, Monday - Friday 

ONLINE:  

www.whalenfurniture.com

 

EMAIL: 

[email protected]

 

 
 

Video Instruction Guides  

Go to 

http://whalen.showuhow.com

 to view step-by-step instructional 

videos for assembling and installing your product. Enter the following 
product number on the ShowUhow homepage. 

 

 

 

PRO44-1TC 

LOT NUMBER:      

 

 

DATE PURCHASED:   /   /  

 

Summary of Contents for PRO44-1TC
















Reviews: