Varytec Spot 90, User Manual

Page: 39 / 64

Use the ‘Calibration’ menu to adjust the start parameters of the device.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘Settings’ . Confirm the selection with [ENTER] and use [UP] or [DOWN] to select the submenu
‘Calibration’ .
Confirm the selection with [ENTER] . The device prompts you to enter a password. Press [UP] or
[DOWN] repeatedly until the display shows ‘018’ and confirm the selection with [ENTER] .
Use [UP] or [DOWN] to select the desired parameter you want to set.
Parameter Function
‘All To Origin’ Resets all parameters of the calibration to factory settings.
‘Pan’ Sets the home position of the rotation.
‘Tilt’ Sets the home position of the inclination movement.
‘Spot Color’ Sets the initial colour of the spot.
‘Gobo’ Sets the first gobo.
Calibrating
Operating
Hero Spot 90 Hero Spot 90 WH
39
moving head