Varytec LED Ball RGBW 50cm 4x8W DMX, User Manual

Page: 41 / 72

7.4 DMX operation
Press [MENU] and then [UP] or [DOWN] until the display shows the menu item ‘DMX Address’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [UP] or [DOWN] to select a value between 1 and 512 (the display shows ‘001’ … ‘512’ ). Con‐
firm the desired selection with [ENTER] .
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
4-channel 509
7-channel 506
9-channel 504
14-channel 499
Setting the DMX address
Operating
LED Ball RGBW 50cm 4x8W DMX
41
LED ball