Varytec Hero Wash 340FX RGBW Zoom, User Manual

Page: 34 / 64

7.2 Main menu
Press [ENTER] to activate the main menu.
Use [UP] and [DOWN] to change the respectively displayed value. When the display shows the
desired value, press [ENTER] .
To exit the menu item without making changes, press [MENU] .
If you don't press any button for 30 seconds the display turns off. A short press on [MENU] ,
[ENTER] , [UP] or [DOWN] will then turn it back on.
All previous settings are retained even when you switch the device off and disconnect it from
the mains.
Use the ‘DMX Address’ menu to set the DMX address.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows ‘DMX
Address’ . Confirm the value with [ENTER] and use [UP] or [DOWN] to select a value between 1
and 512 for setting the desired DMX address.
When the display shows the desired value, confirm the selection with
[ENTER] . To exit the
menu item without making changes, press [MENU] .
Make sure that this number matches the configuration of your DMX controller.
DMX address
Operating
34
Hero Wash 340FX RGBW Zoom
moving head