Varytec Hero Spot Wash 140 WH 2in1, User Manual, Page: 37 / 72

Use the ‘Calibration’ menu to adjust the start parameters of the device.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘Settings’ . Confirm the value with [ENTER] and use [UP] or [DOWN] to select the submenu
‘Calibration’ .
Confirm the value with [ENTER] . The device prompts you to enter a password. Press [UP] or
[DOWN] repeatedly until the display shows ‘018’ and confirm the selection with [ENTER] .
Use [UP] or [DOWN] to select the desired parameter to set.
Parameter Function
‘All To Origin’ Resets all parameters of the calibration to factory settings.
‘Pan’ Sets the home position of the rotation.
‘Tilt’ Sets the home position of the inclination movement.
‘Red ’ Sets the initial intensity for red.
‘Green’ Sets the initial intensity for green.
‘Blue’ Sets the initial intensity for blue.
‘White’ Sets the initial intensity for white.
‘Spot Color’ Sets the initial colour of the spot.
‘Fixed Gobo’ Sets the home position of the static gobo.
Calibrating
Operating
Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1
37
Moving Head