10
Troubleshooting
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom
Remedy
The unit does not work, no light
1. Check the mains connection and the main fuse.
2. Check the settings in manual operation (‘Static Color’)
No response to the DMX con‐
troller
1. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
2. Try using another DMX controller.
Troubleshooting
Blitz Bar 240
43
Stroboscope
